Iberital IB7, Installation And Operation Manual, Page: 70 / 443

EN
GLISH
IBERITAL
68 INSTALLATION AND OPERATION MANUAL
are sufficient for the current consumed by the machine at
full power.
There must be a fixed socket connection to the power
supply for the machine. Adapters must not be used.
If extension cords are used, they must comply with local
safety standards, taking special care not exceed the
maximum permitted current for the same.
4. This machine must be used exclusively for the purpose
for which it was manufactured, that is, the preparation
of coffee and the supply of hot water and steam to heat
drinks. Any other use would be considered misuse, and
therefore dangerous. The manufacturer will accept no
liability for damage caused due to misuse of the machine.
5. When using the machine, some basic safety measures
must be observed:
- do not touch the machine with wet or damp feet or hands.
-
do not use the machine when barefoot.
- do not install the machine in places where cleaning using
water jets takes place.
- do not pull the power supply cable to unplug the machine
from the socket.
- do not allow the machine to be exposed to the elements
(rain, ice, sand, etc.).
- do not expose the machine to temperatures of below 0ºC
without having previously emptied the contents of the boiler
and the pipes. If the water in the interior freezes, disconnect
the machine from the water supply and let the water in the
boiler and pipes melt.
-
do not expose the machine as a whole to temperatures
above 70ºC.
-
do not allow the machine to be manipulated by children
or untrained persons, or any person who has not read this
manual.
- do not remove the machine side panels in order to reset the
high-limit thermostat. Only official technicians authorized
by the manufacturer may remove the side panels and reset
the thermostat.