![background image](http://html1.mh-extra.com/html/ibase-technology/mi910e/mi910e_user-manual_3333055011.webp)
INSTALLATIONS
MI910 User’s Manual
7
Installing the Memory
The MI910E board supports two DDR2 memory socket for a maximum
total memory of
4
GB in DDR2 memory type.
Installing and Removing Memory Modules
To install the DDR2 modules, locate the memory slot on the board and
perform the following steps:
1. Hold the DDR2 module so that the key of the DDR2 module aligned
with that on the memory slot.
2. Gently push the DDR2 module in an upright position until the clips of
the slot close to hold the DDR2 module in place when the DDR2
module touches the bottom of the slot.
3. To remove the DDR2 module, press the clips with both hands.
DDR2 Module
Lock
Lock
Lock
Lock
Summary of Contents for MI910E
Page 8: ...INTRODUCTION 4 MI910 User s Manual Board Dimensions...
Page 16: ...INSTALLATIONS 12 MI910 User s Manual Connector Locations on MI910E...
Page 17: ...INSTALLATIONS MI910 User s Manual 13 MI910E Solder Side...
Page 30: ...INSTALLATIONS 26 MI910 User s Manual This page is intentionally left blank...