![background image](http://html1.mh-extra.com/html/ibase-technology/mi910e/mi910e_user-manual_3333055022.webp)
INSTALLATIONS
18
MI910 User’s Manual
Power LED: Pins 11 - 15
Pin #
Signal Name
11 Power
LED
12 No
connect
13 Ground
14 No
connect
15 Ground
ATX Power ON Switch: Pins 7 and 17
This 2-pin connector is an “ATX Power Supply On/Off
Switch” on the system that connects to the power switch on
the case. When pressed, the power switch will force the
system to power on. When pressed again, it will force the
system to power off.
Reset Switch: Pins 9 and 19
The reset switch allows the user to reset the system without
turning the main power switch off and then on again.
Orientation is not required when making a connection to
this header.
Hard Disk Drive LED Connector: Pins 10 and 20
This connector connects to the hard drive activity LED on
control panel. This LED will flash when the HDD is being
accessed.
Pin #
Signal Name
10 HDD
Active
20 5V
Summary of Contents for MI910E
Page 8: ...INTRODUCTION 4 MI910 User s Manual Board Dimensions...
Page 16: ...INSTALLATIONS 12 MI910 User s Manual Connector Locations on MI910E...
Page 17: ...INSTALLATIONS MI910 User s Manual 13 MI910E Solder Side...
Page 30: ...INSTALLATIONS 26 MI910 User s Manual This page is intentionally left blank...