![background image](http://html1.mh-extra.com/html/ibase-technology/mi910e/mi910e_user-manual_3333055010.webp)
INSTALLATIONS
6
MI910 User’s Manual
Installing the CPU
The MI910E board supports a Socket 478MN (MEROM) processor
socket for Intel® Core
TM
2 Duo, Intel® Celeron mobile processors.
The processor socket comes with a screw to secure the processor. As
shown in the left picture below, loosen the screw first before inserting
the processor. Place the processor into the socket by making sure the
notch on the corner of the CPU corresponds with the notch on the inside
of the socket. Once the processor has slide into the socket, fasten the
screw. Refer to the figures below.
NOTE
: Ensure that the CPU heat sink and the CPU top surface are in
total contact to avoid CPU overheating problem that would
cause your system to hang or be unstable.
Summary of Contents for MI910E
Page 8: ...INTRODUCTION 4 MI910 User s Manual Board Dimensions...
Page 16: ...INSTALLATIONS 12 MI910 User s Manual Connector Locations on MI910E...
Page 17: ...INSTALLATIONS MI910 User s Manual 13 MI910E Solder Side...
Page 30: ...INSTALLATIONS 26 MI910 User s Manual This page is intentionally left blank...