ibaBM-DDCS
Manual
Issue 1.11
39
Advanced
Enable default values
True: In the event of a timeout, the last transmitted value will be
overwritten by the default value. The default value can be preset in the
Analog
and
Digital
tabs.
False: In the event of a timeout, the last transmitted value will remain.
Module Layout
No. analog signals:
Number of lines in the
Analog
tab
No. digital signals:
Number of lines in the
Digital
tab
Browse
In order to select the parameter signals, click on “Browse” in the bottom field. The
parameter browser will open and the nodes (drives) will be displayed. Only the active
nodes (drives) will be displayed here.
In the tree structure, now select the signal via the node number, the parameter group
and the index number. The signal is added to the signal table by double clicking on the
desired signal or clicking on the <Add> button.
Figure 21: Parameter browser
Depending on whether the selected type is analog or digital, the signal will appear on the
Analog
or
Digital
tab. Node number (slave), parameter number (parameter group) and
index are automatically entered.
