Manual
ibaBM-DDCS
34
Issue 1.11
Enabled
True: ibaBM-DDCS module is processed by ibaPDA
False: ibaBM-DDCS module and all submodules are not processed
Name
Name of the module
Use name as prefix
If TRUE is selected, the module name is placed in front of the signal name as
prefix.
Timebase
Acquisition timebase used for this module,
see chapter 8.5. “Time response”.
Connection
IP Address
The IP address of the device in the FOB-D network is displayed here.
Please refer to the description in the ibaFOB-D manual.
Auto enable/disable
TRUE: the data acquisition is started even though the device is missing. During the
measurement process, ibaPDA tries to re-establish the connection. If this is
successful, the measurement will be restarted.
FALSE: the measurement is not started, if ibaPDA cannot establish a connection to
the device.
DDCS
Data set speed (CH0)
You can select the speed of the data set channel here, default value: 4 MBaud.
Data set timeout (CH0)
You can set a timeout for the data set channel here.
Parameter speed (CH3)
You can select the speed of the parameter channel here, default value: 1 MBaud.
Parameter timeout (CH3)
You can set a timeout for the parameter channel here.
DriveWindow timeout
You can set a timeout for a DriveWindow computer here.
Note
Please make sure that the baud rate, adjusted in ibaPDA, corresponds with the settings
of the connected NDBU-95.
A link is available in the bottom field of the
General
tab.
Read configuration from the device
With this link, it is possible to read a configuration directly from the device.
