Manual
ibaBM-DDCS
16
Issue 1.11
8
ibaBM-DDCS in ABB environment
8.1
Configuration with data set and parameter channel
Figure 2:
ibaBM-DDCS in the ABB environment with ABB control
ibaBM-DDCS offers 2 options for capturing and recording measured signals:
1.
Logging of the signals in the data set channel (CH0 connection of the drives).
Simplex
fiber optic connection between ibaBM-DDCS X30 and an arbitrary channel
of the NDBU-95 (NDBU operation mode: “REGEN”). The X31 output must not be
connected to the NDBU-95.
Alternative connection: ibaBM-DDCS is integrated in the connection between
NDBU-95 and ABB control.
2.
Querying of other values from the drives in the parameter data channel (CH3
connection of the drives).
Duplex
fiber optic connection between ibaBM-DDCS
X32/X33 and the CH3 port of a drive or the MSTR port of a NDBU-95 (NDBU
operation mode: “DDCS/DRIVEBUS”).
3.
Furthermore, ibaBM-DDCS offers a connection to loopthrough configuration and
measurement queries of an external computer with DriveWindow. The DriveWindow
computer is connected to the drives via the parameter channel if needed.
Duplex
fiber optic connection between ibaBM-DDCS X34/X35 and the DriveWindow
computer.
