ibaBM-DDCS
Manual
Issue 1.11
11
6
Assembly and disassembly
The device is provided with a mounting rail clip for installation.
6.1
Assembly
1.
Place the mounting rail clip attached to the device on the mounting rail.
2.
Press the device down in such a way that the clip of the mounting rail engages with
a click.
3.
Connect the power supply. Observe the correct polarity.
4.
Connect the other cables.
6.2
Disassembly
1.
Disconnect the power supply.
2.
Disconnect all cables.
3.
Close the open fiber optic inputs and outputs with a cover.
4.
Hold the device to prevent it from falling down and press it slightly downwards.
5.
After that pull the device and lift it up. The clip of the mounting rail will disengage with
a click.
6.
Remove the device.
7.
When storing or transporting the device observe the values specified in the technical
data.
