33
Step: 4
Install the adjustable leg support sub-
assembly item 2 by aligning the slots in it’s base with the
inserts in the underside of the corner shelf worksurface and attaching it using 1/4-20 x .750 hex
head bolts item E and 1/4 flat washers item D. Do not tighten this hardware.
Step: 5
Align the adjustable leg support sub-assembly so that the insert in the lower leg is located over the
hole in the back of the corner worksurface. Loosen the cap screw found on the adjustable leg
support sub-assembly collet and pull the lower leg of the adjustable leg support sub-assembly tight
against corner worksurface and make sure it is aligned with the hole in the back of the corner
worksurface. Tighten the hardware holding the adjustable leg support sub-assembly to the
underside of the corner shelf. Attach the lower leg of the adjustable leg support sub-assembly to the
corner worksurface by installing the 5/16-18 X 2.50 hex head bolt item H and 5/16 flat washer item
B through the hole in the rear of the corner worksurface from the underside. Tighten this bolt.
Tighten the cap screw to secure the adjustable leg support.