2.6.1. Video Settings Setup
Each Annexxus device supports dual streaming: main stream and sub stream. All transmission variables such as stream
type, video resolution, frame rate, bit rate type, bit rate, I Interval (except Annexxus 304) and frame type (if applicable)
can be configured separately for main and sub streams.
Main stream is used for recording, while sub stream can be used for faster remote viewing. To take full advantage of
the dual streaming, it is recommended to set main stream to higher resolution and lower frame rate, and sub stream to
lower resolution and higher frame rate. This allows for a much faster remote viewing, while a high-quality video image
is still being recorded to the DVMS/NVR system and/or to the internal storage device.
To configure Annexxus Main Stream, do the following:
1. From the
Type
drop-down menu, select
Main Stream
2. From the
Stream Type
drop-down menu, select
Video & Audio
to stream and record both video and audio inputs
or
Video
to stream video input only or if audio input is not available.
3. For Annexxus 301, 301C, 301CP models, select
Only P
or
BBP
from the
Frame Type
drop-down menu. Note that
the Frame Type for Annexxus 304, 301C2M and 301D2M is pre-set and cannot be changed by the user.
33
Video Settings Setup
Chapter 2. Remote Connection via SRX-Pro/iP-Pro
Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at