Annexxus 301D2M Alarm/RS-485 extension cable (Optional)
(A)
GND (grey wire)
(B)
Alarm In (red wire)
(C)
Alarm Out B (brown wire)
(D)
Alarm Out A (orange wire)
(E)
RS-485 (-) (green wire) (for future applications, currently not in use)
(F)
RS-485 (+) (yellow wire) (for future applications, currently not in use)
Annexxus 301D2M Spot Monitor BNC cable
To use spot monitor, connect the attached BNC spot monitor cable to the connector located inside the camera dome.
See detailed image below. To access the connector, carefully remove the camera dome and locate the 2-pin connector
inside.
1.3.5. Annexxus 304
Annexxus 304 video encoder accepts AC 24V power. This model features 4 BNC video and 4 BNC audio inputs; BNC to
RCA adapters are provided for RCA audio inputs. Annexxus 301 features four (4) alarm inputs and two (2) relay outputs;
PTZ control can be accomplished via RS-485 TCP/IP port; RS-232 TCP/IP port is provided for troubleshooting purposes.
RJ-45 network port allows for the network connection. This Annexxus model supports two-way audio, however regular
microphone may not be used as a Line IN device; special Line IN audio device is required.
14
Annexxus 304
Chapter 1. Introduction
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at