System Setup > Camera Settings
Revision: 180906
Veo16i User Manual
Page | 42
4. Click AREA SETUP tab, and configure privacy mask area(s).
5. Select AREA 1, AREA 2, AREA 3, AREA 4 as required.
6. Use the mouse cursor to select specific areas you wish to mask with the rectangle.
If using remote control, press [
Select
] to display the selection start point, use the arrow buttons
to select the area(s). Selecting masked area again will exclude the corresponding block from the
masking area. To remove entire selected area, click
DELETE
and start over.
7. To configure privacy mask for another channel, change the channel in the drop-down menu.
8. Click
APPLY
to save new configurations.
9. When done, click
CLOSE
or press [
EXIT
] on the remote control.
