OPERATING THE VEO 120XXN WITH THE REMOTE CONTROL
Figure 10 describes the buttons on the Veo 120XXN remote control. Most buttons have a corresponding
button/function on the front panel of the unit. Buttons that are not usable are not described. The tone
sound for remote control and front panel buttons can be enabled/disabled in the system menu as per
customer preference.
Please note that if several Veo 120XXN units are located close together, the remote control might
operate more than one unit. Ensure that the Veo 120XXN units are located away from one another.
No.
Function
1.
PWR:
Power button. Turns the system on or off.
2.
RETURN:
Returns to the previous menu or cancels action.
3.
SETUP:
Displays the system setup.
4.
Channel selection buttons:
Selects the available channel(s) up to a maximum of 16
depending on the model) or allows entering the user password. To enter channel number 10
and above, press the ‘
1-
’ button first, followed by a second digit (0-6).
5.
ENTER:
Enters the menu/submenu or confirms action.
6.
Direction control buttons:
The functions of these buttons correspond exactly to the similar
buttons on the front panel of the system. Please refer to page 8 of this manual
for more information.
7.
DISP
: Selects screen mode between split screen division or full screen modes. Depending
on a Veo model, the following split screen divisions will be available: full screen, 4-, 6-, 8-,
9-, 13-, or 16- split screen division.
8.
SEARCH:
Displays the search mode for video data searching.
9.
PTZ/FOCUS:
Displays the camera PTZ/FOCUS control mode.
Figure 10. Remote Control Operation
1
2
3
4
5
6
7
8
9
0
PWR
SETUP
RETURN
ENTER
DISP
SEARCH
P/T/Z
PANIC
KEYLOCK
SEQUENCE
ZOOM
ARCHIVE
DISP
SEARCH
P/T/Z
OSD
KEYLOCK
SEQUENCE
ZOOM
ARCHIVE
1
2
3
4
5
6
7
8
9
12
