Use this option to select the PTZ protocol used by each camera. The Veo 120XXN supports several
PTZ protocols. Follow the camera manufacturer’s recommendations when choosing the PTZ protocol
for your cameras. Make sure that the address in the Address column is the same as the Address of
the PTZ camera. The PTZ PROPERTY button, allows changing the following PTZ settings: AUTO
FOCUS (ON/OFF), AUTO IRIS (ON/OFF), P/T SPEED, ZOOM SPEED, FOCUS SPEED and IRIS SPEED.
•
Motion Sensor:
Use this option to set the sensitivity level for each camera (1-10, where 10 is
maximum sensitivity) when recording is set to motion. See the section on Setting up Motion
Detection Recording on page 33 for complete instructions on how to use this setup.
•
Please note that high sensitivity settings increase the occurrences of the false motion detection.
Figure 28. PTZ Setup Camera Menu
Figure 30. Motion Sensor Camera Menu
Figure 26. Colour Setup Camera Menu
•
Color Setup:
Use this option to configure brightness, contrast, tint and color for each camera. The
default value for each setting is 50. To adjust the setting for a desired camera, select any parameter
for a desired channel and press ENTER to display the new menu in the bottom of the screen. In this
new menu window, brightness, contrast, tint and color parameters can be changed for each desired
video channel. To return to the main menu, press RETURN.
Figure 27. Colour Adjustment Window
Figure 29. PTZ Property Window
20
