INSTALLATION
21
MJPEG SETTING
H.264 Setting
• Resolution: Choose the resolution size. Choices include 1080P, SXVGA, 720P,
XGA, SVGA, D1
•
Quality: Set the image’s quality as High, Normal or Low.
• Frame Rate: Frame rate is the image transfer speed. 30 fps is 30 image
transmissions per second, 15 is 15 images transmission per second, 7.5 is 7.5
images transmission per second…etc.
◦ Note 1: Live View uses the MJPEG codec. Turning MJPEG off will result in
no video for Live View.
◦ Note 2: If MJPEG is selected for both primary streaming and third
streaming, Live View will display the third streaming codec choices.
◦ Note 3: Some video player (VLC Player… etc.) can be used to view the
MJPEG, H.264 and MPEG4 RTSP Streaming
• Resolution: Choose the resolution size. Choices include 1080P, SXVGA,
720P,XGA, SVGA, D1
• Bit Rate: According to your bandwidth, specify a value for data transmission
rate (kbps). Higher value gets higher video quality.
• Frame Rate: Frame rate is the image transfer speed. 30 fps is 30 frame
transmissions per second, 15 is 15 frame transmissions per second, 7.5 is 7.5
frame transmissions per second…etc.
