INSTALLATION
26
5.3.5 Update
This function is designed to update firmware. Stop all camera operations when
you update firmware. Do not turn off power or disconnect the internet connection
during the firmware update process. Click “Restart Camera” after you have up
-
dated firmware successfully.
•
Restart Camera – The camera is restarted without changing any settings.
Typically used after updating firmware. After clicking, a pop up will
appear asking you to confirm. Click Yes.
• Factory Default – Resets the camera to factory settings but keeps the
Network settings. After clicking, a pop up will appear asking you to
confirm. Click Yes.
• Hard factory default – Resets the camera to factory settings and will
cause all parameters (including the IP address) to be reset. After
clicking, a pop up will appear asking you to confirm. Click Yes.
