INSTALLATION
23
• BLC (Backlight Compensation): this function adjusts the image
to compensate for areas that are too dark due to insufficient light.
◦ ON: enable the BLC function.
◦ OFF: disable the BLC function.
• Brightness: adjust the image brightness level, Selectable values from 0% to
100%.
• Contrast: adjust the image contrast level, Selectable values from 0% to 100%.
• Saturation: adjust the image saturation level, Selectable values from 0% to
100%.
• Sharpness: adjust the image sharpness level, Selectable values from 0% to
100%.
Click “Communication” to view the current network settings, including “Network” and
“NTP”. Configure all Network, and NTP settings in the Network section.
1. DHCP: the IP address is automatically obtained when this is checked;
otherwise, uncheck it to set up the network settings manually. If you enable
the DHCP function, just specify DNS and HTTP Ports in the below fields.
2. IP Address: specify your IP address here if you don’t select DHCP
(default setting: 192.0.0.16)
3. Subnet Mask: use default number: 255.255.255.0.
Communication:
