![background image](http://html.mh-extra.com/html/i-warm/spooled-kit/spooled-kit_installation-manual_601963016.webp)
J
Install the temperature gage. You will need:
— to put the temperature gage in a corrugated tube.
The temperature gage shall be inside the tube, next
to its one end. The connecting wire shall go out
from the other end of the tube.
— Tightly seal the floor end of the tube with the
gage to prevent mortar from entering the tube.
— Put the corrugated tube with the temperature gage
into the groove and bring it to the thermostat or
service box. Bending radius of the tube shall
exceed 5 cm. The corrugated tube shall reach the
thermostat or service box to allow for convenient
gage replacement in case of its damage.
www.iwarm.com
Spooled Underfloor Heating Kit
15
Plug the end
of the tube securely
Summary of Contents for Spooled Kit
Page 1: ...INSTALLATION MANUAL ...
Page 38: ...Spooled Heating Kit ...