![background image](http://html.mh-extra.com/html/i-warm/spooled-kit/spooled-kit_installation-manual_601963028.webp)
6. Turning the System on and Operation
After the mortar or adhesive solution has dried up (see
corresponding application instructions), you can turn on
the I-WARM floor heating system. Turn the thermostat on
and set desirable heating level (see the thermostat certifi
cate instructions). After the floor heating system has
been installed, for the first time you can set a maximum
heating level. This will quicken floor heatingup. When the
comfort temperature has been reached, you can turn the
heating down to the desirable level.
For the first time the "warm floor" feeling may not
appear until after some time.
It is especially applicable to newly built premises with
out turned on heating. Do not worry and let the system
fully warm up the room.
7. Advices and Notes
Thanks to automatic temperature regulation, I-WARM
system uses as much power as it is necessary to reach a
desirable thermal comfort level. Installed in each room
thermostats regulate heating process independently,
which contributes to energy savings.
www.iwarm.com
Spooled Underfloor Heating Kit
27
Summary of Contents for Spooled Kit
Page 1: ...INSTALLATION MANUAL ...
Page 38: ...Spooled Heating Kit ...