49
DDNS Settings:
Click this button to setup DDNS configuration.
The DDNS is implemented through a dynamic domain resolution server. It requires a PC running in
the server with fixed IP address on the Internet. IP Camera DDNS settings interface as above figure.
DDNS:
Click this button to setup the DDNS function, there are three default DDNS server for the
user choice. If your IP Camera is set to use PPPoE as its default network connection, you can use
the Dynamic DNS (DDNS) for network access. Before you start, please registration on the DDNS
server is required before configuring the DDNS settings of the IP Camera. Please do the process to
setup the DDNS.
1.
Enable DDNS:
Check “
Enable DDNS
“ icon to use the DDNS function.
2.
DDNS Type:
Select DDNS server type (There are Dyndns/ PeanutHull/NO-IP/ 3322/
DnsDynamic five servers selectable), or entry the
Server Address.
3.
Entry the
Port number (default is 80). User name/Password and confirm the password again.
4.
Entry the standby domain which you had been applied.
5.
Click “
Save”
icon to complete the parameters settings.
6.
You can enable/disable the DDNS from the” Status” section.
Summary of Contents for ANYCAM IR-2MIPM03 Series
Page 12: ...12 1 4 Product Dimension...
