36
1.
Select the Area number, then check “ Enable” icon.
2.
Press the left button and drop the mouse to select where want to setup the ROI area.
Choose the number from Level section. The level higher will get clearer image of ROI.
Click
Save
icon to set up the setting.
Motion Detection:
Click this button to setup motion detection function.
Following the steps as below to setup the motion detection function..
1.
Check ”
Enable
” and select the value of sensitivity. The high value will get more sensitivity.
2.
Setup the date from drop of week section (Default whole week), and select the time period. You
can select multi period per day. Repeat the above process to setup another date.
3.
Select motion detection area from “
Area setting
” section. Click “
Drawing
“ icon, then press and
drag the left button of Mouse to setup the detection areas. You can setup multi region area number
for each camera. Click “Clear” bottom to clear the current detective areas.
4.
Specify the notify method (Such as Trigger alarm output, move PTZ camera position, notify via
email) when an event occur.
5.
Click
Save
icon to change the setting.
Summary of Contents for ANYCAM IR-2MIPM03 Series
Page 12: ...12 1 4 Product Dimension...
