40
Interval:
Set the counting time interval, when it is more than the time interval, the flow counter will
reset and enter into next counting period automatically. The maximum is 3600 seconds; 0= Ignore.
Threshold:
Set the upper limit value for target counting, the alarm will be triggered automatically
when the value is more than the setting.
Total Counter:
Enable or disable the Total Counter function.
Time:
Set the effective time period for the day of total counter.
Alarm Threshold:
Set the upper limit value for the day of total flow, the alarm will be triggered
automatically when the value is more than the setting.
Target Percent:
Setup the minimum percentage ration (target size/ image area) of effective counting
targets. Once the targets ration is smaller than the setting value, the system will ignore the target
which passing through the trigger line.
Email:
Check “Email” and once the event triggers that it will send Email to setting email address.
Snap:
Check “Snap” and once the event triggers that it will linkage camera to snapshot picture and
save on the SD card.
Record:
Check “Record” and once the event triggers that it will linkage camera to save the video on
the SD card.
Alarm Output:
Check “Alarm output” and once the event triggers, the camera will linkage to alarm
output.
PTZ:
Check “PTZ” and once the event triggers, the camera will linkage PTZ camera to move the
assign Preset point.
Preset:
Setup the Preset point for the PTZ camera move to when the event is triggered.
Snap Interval:
Setup the snapshot interval time.
Snap Number:
Setup the snapshot image count for each event triggers.
Save:
Click “
Save”
icon to store the setting.
Summary of Contents for ANYCAM IR-2MIPM03 Series
Page 12: ...12 1 4 Product Dimension...
