44
Line Crossing:
Click this button to setup triple wire detection function.
Enable:
Enable or disable the line cross detection function.
Arming Schedule:
Arm schedule of enable area detection. Check/Uncheck from Monday to
Sunday, each date can has its own trigger period.
Area Setting:
Click “
Drawing
“ icon, then press and drag the left Mouse button to setup the
detection lines from
Area Setting
section. Click the right button to complete the detection region
setting. You can click “ Swap AB” to exchange the Point A and B position.
Clear:
Click Clear to delete all detection regions
Detection Area:
To add new Detection Area (Max. 4 regions) and each line can setup individual
corresponding parameters.
Detection Type:
There are “A
B Alarm” and “B
A Alarm” modes. Choose one for the
detection type.
Target Percent:
Setup the minimum percentage ration (target size/ image area) of effective counting
targets. Once the targets ration is smaller than the setting value, the system will ignore the target
which passing through the trigger line.
Email:
Check “Email” and once the event triggers that it will send Email to setting email address.
Summary of Contents for ANYCAM IR-2MIPM03 Series
Page 12: ...12 1 4 Product Dimension...
