3.3.1 VGA SYNC:
This function is only available when the CCE900-
IP-T is connected with VGA input, and sometimes the
picture shifts from screen, this function is used to auto
adjust the picture.
3.3.2 REFRESH:
To refresh the CCE900-IP-T Transmitters list.
3.3.3 CCE900-IP-T SETTING:
Use this function to setup CCE900-
IP-T:
>MULTI/ONE CCE900-IP-R
>BANDWDITH SETTING
>INFORMATION
>EXIT
3.3.3.1 MULTI/ONE CCE900-IP-R:
To set CCE900-IP-T as
multicast mode (for one-to-many) or unicast mode (for
one-to-one).
3.3.3.2 BANDWIDTH SETTING
This function adjusts the bandwidth usage of the CCE900-
IP-T. There are three levels for selection: LOW, MID, HIGH.
Please note to set LOW, it will use lower network
bandwidth and get a more efficient performance but will
come with lower image quality.
3.3.3.3 INFORMATION:
This function shows the CCE900-IP-T and
AV-
901R basic information:
CCE900-IP-T
VERSION aa26
SUPPORT MULTI CCE900-IP-R
BANDWIDTH LOW
DVI IN 1024 X 768
CCE900-IP-R
VERSION a901 0126
IP 192.168.168.22
VGA OUT 1024 X 768
MIC IN
INTERNAL IR
8
