3.3.4 CCE900-IP-R OFF:
To disable the connection between the
CCE900-IP-R and connected CCE900-IP-T. To enable the
connection, press the push button again.
CCE900-IP-R off
3.3.5 Connection Method:
The system provides 3 connection
method:
>First Available
>By Priority
>Dedicated
>EXIT
3.3.5.1 First
Available:
This function sets the CCE900-IP-R to
connect to the first available CCE900-IP-T which it found
first.
3.3.5.2 By
Priority:
This function sets the CCE900-IP-R to
connect to the CCE900-IP-T according to the priority. You
can set the 1
st
priority and the 2
nd
priority for 2 different
CCE900-IP-T transmitters. As the following picture,
there are two sections, each has a list of all Transmitters
that are currently on the network; just press the source
button to move the highlight to the desired Transmitter,
wait a few seconds, and the settings will be saved and
restart. The prefixed “*” indicate the Transmitter with
that priority setting.
9
