3-38
Seats & Safety system
Securing a Child Restraint System
with a lap/shoulder belt
When not using the ISOFIX system, all
Child Restraint Systems must be secured
to a rear seat with the lap part of a lap/
shoulder belt.
B
0065
KO
08
B
0065
KO
08
Installing a Child Restraint System with a
lap/shoulder belt
To install a Child Restraint System on the
rear seats, do the following:
1. Place the Child Restraint System on a
rear seat and route the lap/shoulder
belt around or through the Child Re-
straint System, following the Child Re-
straint System manufacturer’s instruc-
tions. Make sure the seat belt webbing
is not twisted.
B
0065
KO
03
B
0065
KO
03
2. Fasten the lap/shoulder belt latch into
the buckle. Listen for the distinct “click”
sound.
Information
Position the release button so that it is easy
to access in case of an emergency.
B
0065
KO
06
B
0065
KO
06
3. Remove as much slack from the belt as
possible by pushing down on the Child
Restraint System while feeding the
shoulder belt back into the retractor.
4. Push and pull on the Child Restraint
System to confirm that the seat belt is
holding it firmly in place.
If your Child Restraint System manufac-
turer recommends the use of a top-tether
with the lap/shoulder belt, see page 3-39.
To remove the Child Restraint System,
press the release button on the buckle
and then pull the lap/shoulder belt out of
the Child Restraint System and allow the
seat belt to retract fully.
