9-44
Maintenance
OTA
070039
OTA
070039
Blade type
Blade type
Normal
Normal
Blown
Blown
Slow Blow type
Slow Blow type
Multi fuse
Multi fuse
Normal
Normal
Blown
Blown
Normal
Normal
Blown
Blown
A vehicle’s electrical system is protected
from electrical overload damage by fuses.
This vehicle has 2 fuse panels, one locat-
ed in the driver’s side panel bolster, the
other in the engine compartment near
the battery.
If any of your vehicle’s lights, accessories,
or controls do not work, check the appro-
priate circuit fuse. If a fuse has blown, the
element inside the fuse will be melted.
If the electrical system does not work,
first check the driver’s side fuse panel.
Before replacing a blown fuse, discon-
nect the negative battery cable.
Always replace a blown fuse with one of
the same rating.
If the replacement fuse blows, this indi-
cates an electrical problem. Avoid using
the system involved and immediately
consult an authorized HYUNDAI dealer.
Information
Three kinds of fuses are used: blade type
for lower amperage rating, cartridge type
and multi fuse for higher amperage rat-
ings.
WARNING
• Never replace a fuse with anything
but another fuse of the same rating.
• A higher capacity fuse could cause
damage and possibly a fire.
• Never install a wire or aluminum foil
instead of the proper fuse - even as a
temporary repair. It may cause exten-
sive wiring damage and a possible
fire.
NOTICE
Do not use a screwdriver or any other
metal object to remove fuses because it
may cause a short circuit and damage
the system.
Information
The actual fuse/relay panel label may differ
from equipped items.
FUSES
