3-20
Seats & Safety system
B
0059
KO
11
B
0059
KO
11
To release the seat belt:
The seat belt is released by pressing the
release button (1) in the locking buckle.
When it is released, the belt should auto-
matically draw back into the retractor.
If this does not happen, check the belt to
be sure it is not twisted, then try again.
2-point rear center seat belt
(2nd row seat)
OKS
032038
L
OKS
032038
L
To fasten your seat belt:
To fasten a 2-point static type belt, insert
the metal tab into the locking buckle.
There will be an audible “click” when the
tab locks into the buckle. Check to make
sure the belt is properly locked and that
the belt is not twisted.
OKS
032036
L
OKS
032036
L
With a 2-point static type seat belt, the
length must be adjusted manually so it
fits snugly around your body. Fasten the
belt and pull on the loose end to tighten.
The belt should be placed as low as possi-
ble on your hips, not on your waist. If the
belt is too high, it could increase the pos-
sibility of your being injured in an acci-
dent.
