Rev: 1.0
Hyundai Electronics Confidential Proprietary
21
Menu item “2.Input Slot Mode” of TEST CALL CONFIGURATION menu is used to input the Slot Mode.
Valid values of Slot Mode are 0 and 1. If incorrect value is inputted for Slot Mode, the default value of 1 will
be used for Slot Mode. The following example illustrates the usage of this menu item.
Select MENU No ---->
2
Slot Mode (0 or 1 (Default value is 1)) >
1
7.3.1.3
Menu Item: Input Slot Cycle Index
Menu item “3.Input Slot Cycle Index” of TEST CALL CONFIGURATION menu is used to input the Slot
Cycle Index in hexadecimal. Valid values of Slot Cycle Index are in the range 0 to FF. If incorrect value is
inputted for Slot Cycle Index, the default value of 0 will be used for Slot Cycle Index. The following example
illustrates the usage of this menu item.
Select MENU No ---->
3
SLOT CYCLE INDEX in Hex(Default Value is 0) >
0
7.3.1.4
Menu Item: Input SERVICE OPTION
Menu item “4.Input SERVICE OPTION” of TEST CALL CONFIGURATION menu is used to input the
Service Option. The following examples illustrate the usage of this menu item.
Example 1
: This example illustrates the selection of Service Option for a Markov Call. First the type of Test
Call is selected as Markov. Then Rate Set (8K or 13K) is selected. Finally Data Rate (1/8 or ¼ or ½ or Full or
Variable) is selected.
Select MENU No ---->
4
<<< SERVICE OPTION >>>
1 : MARKOV
2 : LOOP BACK
3 : AUTO MARKOV CALL
Select SERVICE OPTION No ---->
1
Service Option 8K(0) 13K(1) >
0
<<< Rate of MARKOV >>>
1 : 1/8 RATE
2 : 1/4 RATE
3 : 1/2 RATE
4 : FULL RATE
5 : Variable RATE
Select RATE No ----> 1
Example 2
: This example illustrates the selection of Service Option for a Loop Back Call. First the type of
Test Call is selected as Loop Back. Then Rate Set (8K or 13K) is selected.
Select MENU No ---->
4
<<< SERVICE OPTION >>>
1 : MARKOV
2 : LOOP BACK
3 : AUTO MARKOV CALL