Rev: 1.0
Hyundai Electronics Confidential Proprietary
37
Select MENU No ---->
5
RFC GAIN(Current 0(MAX:0 - MIN:127))>
0
CDMA(0),SECTOR(0),RFC ATTEN(0)
Change Parameters (0:exit, 1:continue, 2:change)?
1
7.8 RESOURCE
STATUS
RESOURCE STATUS menu is invoked by selecting option “6.Resource Status” in the main menu. It is shown
below.
Select MENU No ---->
6
======================== RESOURCE STATUS ========================
0.Goto TOP MENU
1.Display Carrier(BLINK) data
2.Display Channel Card data
3.Display Walsh Code
4.Display Power bank
5.Display Using TCE
Select MENU No ---->
RESOURCE STATUS menu is used to display the status of Call Resources.
7.8.1
Μενυ Ιτεµ: ∆ισπλαψ Χαρριερ(ΒΛΙΝΚ) δατα
Menu item “1.Display Carrier(BLINK) data” of RESOURCE STATUS menu is used to display status of
BLINK. The following example illustrates the usage of this menu item.
Select MENU No ---->
1
CARRIER(id)>>block, cur_stat, user_per_offset, use_cnt
(frameoffset), use,use_cnt
----------------------------------------------------------------
CARRIER(0)>> M_UBLK, NORMAL,6, 1
(00),IDLE,0,(01),IDLE,0,(02),IDLE,0,(03),IDLE,1
(04),IDLE,0,(05),IDLE,0,(06),IDLE,0,(07),IDLE,0
(08),IDLE,0,(09),IDLE,0,(10),IDLE,0,(11),IDLE,0
(12),IDLE,0,(13),IDLE,0,(14),IDLE,0,(15),IDLE,0
7.8.2
∆ΙΣΠΛΑΨ ΧΗΑΝΝΕΛ ΧΑΡ∆ ∆ΑΤΑ µενυ
DISPLAY CHANNEL CARD DATA menu is invoked by selecting option “2.Display Channel Card data” in
RESOURCE STATUS menu. It is shown below.
Select MENU No ---->
2