INSTALLATION & OPERATION MANUAL
L500 Series
1) The cross-section of the battery cables should be at least 40 mm
2
and no longer than 4 m.
2) If the cable is longer than 4m, the cross-section should be at least
50 mm
2
.
3) Recommended battery capacity is over 100 amperes.
4) Connect the battery (+) cable to the starter motor.
5) Connect the battery (-) cable to system ground (engine block).
6) Battery cables should be clean and tightly connected.
- 37 -
CHAPTER 7
ELECTRICAL SYSTEM
CAUTION
DO NOT TOUCH OR REMOVE ELECTRICAL PARTS WHEN STARTING OR
DURING OPERATION.
KEEP HANDS, HAIR, AND CLOTHES AWAY FROM THE FLYWHEEL AND
OTHER ROTATING PARTS WHILE THE ENGINE IS RUNNING.
BATTERY CABLE CONNECTIONS
(-) Cable ( For Engine Ground )
(+) Cable (For Starter moter)