Foreword / Starting your Electric vehicle
1-16
Information
ś
V2L discharging mode will shut off if
the vehicle is off using indoor V2L on
the vehicle state of ON.
ś
Opening the charging door or
connecting the V2L connector to the
charging inlet, the V2L discharging
mode will shut off. If you want to
use the indoor and outdoor V2L
simultaneously, firstly connect the V2L
connector to the charging inlet and use
the indoor V2L.
CAUTION
ś
Be well-informed of the manual to
prevent accidents.
ś
The V2L discharging mode is
blocked automatically in case of
overheating. (When the discharging
mode is blocked, check whether
the V2L connector or power plug
is contaminated, worn, corroded
or broken or the home appliance
capacity is over 16 A. If the
temperature falls to proper level
after it is left unattended, you can
use it again. Use proper home
appliances.)
ś
Do not remodel or disassemble
the provided V2L connector. The
failure caused by remodeling or
disassembling is not covered by the
warranty.
ś
Do not drop the V2L connector or
give a strong impact to it.
ś
Do not place objects on the V2L
connector.
ś
Be sure to disconnect the V2L
connector from the vehicle when you
are finished using V2L.
ś
When the high voltage battery
charge reaches the set discharging
limit(%), the operation stops, and
a warning message is displayed on
the instrument panel. If you want
V2L operation, set the discharging
limit(%) lower than the current
battery charge.
ś
When using various electric
products, use them below the
maximum power capacity that can
be supplied by the vehicle.
ś
If you use an electrical appliance
that exceeds the maximum power
capacity that the vehicle can supply,
the operation will stop and a warning
message will be displayed on the
instrument panel. Make sure the
total power consumption of the
electrical appliance you use exceeds
the V2L maximum power capacity.
ś
Some of the electric products may
not operate normally even if the
product has power consumption less
than the maximum power capacity
provided by the vehicle.
-
Electrical products that require
high power during initial
operation.
-
Measuring devices that need to
process accurate data.
-
Electric products sensitive to
inverter type AC power supply
(Inverter: A device that converts
DC power into AC power)
ś
Do not use products that require
a continuous power supply,
such as medical equipment. The
power supply may be interrupted
depending on the vehicle’s
condition.
ś
Only use home appliances under 16
ampere.
ś
Put the power plug fully and use
the qualified plug that meets the
standard. If you use worn, corroded
or broken plug or improper plug, it
might be a cause of malfunction.
