Hyundai HYW10200, User Manual

Page: 11 / 22

PROHIBITED OPERATIONS - SAFETY RULES
• Do not impede water coming out of the high-pressure hose. This may cause the hose to
burst, which is dangerous for the operator.
• Do not remove the protective cover of the internal equipment while operating the cleaner.
• The cleaner generates heat when operating, so touch it only when it cools down. Do not
touch the steam exhaust vent until it is completely cool.
• Do not use the supply cable or the connecting hoses to move the machine.
• Do not use the power plug for switching on and off.
• Do not use the machine on sloping surfaces.
• Do not use the machine when barefoot.
•
Always wear rubber boots and protective goggles when using the machine
• To protect yourself against any parts that may get detached, it is necessary to wear
protective clothing (for example, when descaling or hydro-sandblasting, etc.).
• Never drink the water coming out from the machine; it has not to be used as drinkable water.
• Use the machine where and when you have sufficient lighting.
• The machine must never be left unattended while operating. When you have finished with the
cleaner or doesn't use it for a long period of time, you must switch it off.
• When using the machine in dangerous areas (eg. fuel service pumps) keep to the relevant
• safety regulations.
• The machine equipped with “Total Stop” (or Stop’n Go) device, automatically stops if it is
inactive for more than one minute, thanks to a safety device, in order to avoid damaging the
seals. To use it again it is enough to open the spray gun. If your machine has not the Total
Stop, after 4-5 minutes of inactivity, you have to switch it off manually.
• Do not cover or store the machine in insufficiently ventilated areas.
• Do not repair the pump when operating or powered up.
• Do not carry out makeshift repairs on the power cable and prevent it from getting damaged.
In the case of damage, the entire cable must be replaced by the technical support service.
• Do not direct the water jet against the machine or any live components (cable, plugs, etc.).
This can cause electrical damage and danger for the operator.
• Avoid using the pump under the rain or in thunderstorms and whenever water or other liquids
may come into contact with the cleaner. Every electrical component must be protected
against water splashes to avoid short-circuiting.
• Do not place heavy objects on the machine cover.
• Do not put anything on the exhaust vent to allow steam coming out.
• Avoid dry running the pump as it could damage its internal parts.
Page 11