29
6.54
Pinching the saw chain along the top of the guide bar may push the guide bar rapidly
back towards the operator or pinching the guide bar making it become stuck in the cut.
Stop the saw immediately, remove the HT lead and use a wedge to release the guide
bar from the pinch point.
6.55
Understanding kickback and pinching can help greatly reduce the risk of injury.
6.56
Make sure the chain is properly adjusted before operating the chainsaw.
6.57
Never attempt chain adjustment with the engine running.
6.58
Always make sure the cutting attachments are properly installed and firmly tightened
before operation.
6.59
Do not operate the machine under the influence of alcohol, medication or any other
form of drugs.
6.60
The operator is responsible for the safety of this machine.
6.61
Bystanders and animals must be at least 15m away from the operator when using this
tool.
If approached, stop working immediately and do not continue until the person/s have
left the area.
6.62
Allow the machine to do the work, do not force it.
6.63
Do not operate in adverse weather conditions or low light levels.
6.64
Do not use the machine while stood on ladders, stools or any other unsecure platform.
6.65
Do not put any body parts near and of the attachments when in use.
6.66
Before making any adjustments, repairs or refuelling, turn the engine off, remove the
spark plug HT lead cap and allow the engine to cool completely.
6.67
Always wear the correct Personal Protective Equipment (PPE) when operating the
machine.
GENERAL SAFETY
