![background image](http://html.mh-extra.com/html/hyundai/hycp5030/hycp5030_user-manual_2197164021.webp)
Page 21
9.1.3.
Start the engine and allow it to run until it stops. This ensures no fuel is left in
the carburetor. Run the engine until it stops. This helps prevent deposits from
forming inside the carburetor and possible engine damage.
9.1.4.
While the engine is still warm, drain the oil from the engine. Refill with fresh
oil of the grade recommended in the Engine Manual.
9.1.5.
Allow the engine to cool. Remove the spark plug and put 60 ml of SAE-30 of
high quality motor oil into the cylinder. Pull the starter rope slowly to distribute
the oil. Replace the spark plug.
Remove the spark plug and drain all of the oil from the cylinder
before attempting to start the unit after storage.
9.1.6.
Use clean cloths to clean off the outside of the compactor and to keep the air
vents free of obstructions.
Do not use strong detergents or petroleum based cleaners
when cleaning plastic parts. Chemicals can damage plastics.
9.1.7.
Carefully fold the upper handle down. DO NOT allow control cables to become
pinched or bent.
9.1.8.
Store your plate compactor in upright position in a clean, dry building that has
good ventilation.
DO NOT store compactor with fuel in a non-ventilated area where fuel
fumes may reach flame, sparks, pilot lights or any ignition sources.
Use only approved fuel containers.
9.2.
Lifting & transporting.
9.2.1.
See specification section for the weight of the machine.
Summary of Contents for HYCP5030
Page 1: ...User Manual ...