Page 12
8.
ASSEMBLY
5.1.
Following the assembly directions below, you will be able to assemble the plate
compactor within a few minutes.
5.1.1.
Handle.
5.1.1.1.
Unfold the handle as shown.
5.1.1.2.
Mount the handle as shown. make the handle ends slot into the
channels provided by the engine deck. Place flat washers 10, followed by
hex bolts M10x65 at the outer side, and tighten with lock nuts M10 at the
inner side.
5.1.1.3.
Secure the throttle control onto the upper handle with a flat washer
5 and a bolt 5x25.
5.1.1.4.
Fasten the throttle control cable with cable fasteners.
5.1.2.
Folding wheel kit x 3 (optional see page 9).
5.1.2.1.
Line up the holes in the link plates and engine deck. Slide bolts
M10x30 through the holes from one side, then lock nuts M10 from the
other side. Tighten down.
Summary of Contents for HYCP5030
Page 1: ...User Manual ...
