3-101
Mount the converter(1) by means of lifting
equipment until contact is obtained.
(S)Eyebolts assortment
5870 204 002
(S)Lifting chain
5870 281 047
1
D507TM198
D507TM199
Fasten the flexplate(1) by means of
hexagon screws(2).
Install washers between converter(3) and
flexplate(1) under the hexagon screws.
Lock the hexagon screws with loctite
(Type No.262).
Tightening torque(M12/10.9)- - - M
A
=11.7kg m
1
2
3
D507TM197
1
2
Fasten the converter bell, pressure oil
pump and stator hollow shaft together by
means of cap screws.
Different bolted connections.
1 = Bolted connection converter bell/tran-
smission housing rear section.
Tightening torque(M10/8.8) - - M
A
=4.7kg m
2 = Bolted connect. pressure oil pump/
stator hollow shaft transmission hous-
ing rear section.
Cap screws with O-rings.
Grease the O-rings.
https://www.forkliftpdfmanuals.com/
Summary of Contents for HDF 50-7S
