Anti-Theft Security Code
1. Anti-Theft Security Code
The HYUNDAI Bluetooth radio is equipped with an anti-theft security code to deter theft. By
preventing operation unless a security pin code is entered, the radio is rendered useless.
Each radio requires a unique security code. The security code is printed on a card and
supplied with this user manual when the vehicle is delivered from the dealer to the first owner.
1.1 Entering the Security Code
1) Turn on the radio.
2) If the radio displays
ENTER SECURITY CODE
, then a security code must be entered.
3) The security code number is found on the card supplied with your new HYUNDAI vehicle.
4) The security code is a four digit number. For the example below, the code is 3212.
a) Press Preset 1 button three times.
b) Press Preset 2 button twice.
c) Press Preset 3 button once.
d) Press Preset 4 button twice.
5) Check that the security code shown on the display matches the number on the card (for
this example) 3212.
6) Press Preset 5 button to activate the entered security code shown on the display.
7) If the code is correct, the radio will begin normal operation.
8) If the code on the display is not the same as printed on the card, change the relevant
digit by pressing the preset button until the correct number is displayed.
9) If an incorrect code is entered the radio will display
2 ENTRY ATTEMPTS REMAINING.
10) Enter the code again. If the display shows
1 ENTRY ATTEMPT REMAINING
, it is
most likely that the correct security code entry instructions were not followed or the
security code entered was incorrect.
11) If after 3 incorrect codes are entered, the radio will switch off. Wait for one hour before
attempting to re-enter the correct security code using the above correct procedure.
Notes When Entering the Security Code:
a) The security code is usually entered into the radio prior to collection of the new vehicle.
b) If the car battery is disconnected or exhausted, the security code must be re-entered.
c) Ensure the car battery is in good order before entering the security code.
d) If the radio fails to operate after carrying out the above procedure, visit a HYUNDAI
dealer for assistance or to verify the security code is correct.
e) Please do not leave the security card containing the security code in the vehicle.
Keep the card in a safe and secure place.
4