Hyundai FD-01, Instruction Manual

Page: 18 / 34

General Controls
5. General Controls
b
Power ON/OFF
Press knob
b
momentarily to turn the radio on or off.
Via Steering wheel remote control:
Pressing and holding the MODE button on the steering wheel controls will turn the radio on
or off.
b
Volume UP/DOWN
Turn knob
b
right to increase the volume level. The level will be shown as “VOLUME xx”
on the display. Turn knob
b
left to decrease the volume level. After 3 seconds the display
will return to the previous mode.
b
Start-Up Volume Setting
Start-up volume is the volume level the radio will play at when next turned on. To adjust:
1) Press and hold knob
b
longer than 3 seconds.
2) Initial Volume is displayed. Press knob
b
again; the current start-up volume level is
displayed.
3) Turn knob
b
left or right to increase or decrease the volume, then press knob
b
again to
set that volume level as the start-up volume level.
b
Clock Setting
Current time is shown on the top of the display when the radio is switched on. When the
radio is off, the time is shown in larger text in the centre of the radio display. To adjust:
1) Press and hold knob
b
longer than 3 seconds.
2) Turn knob
b
right to display Clock Setting . Press knob
b
again.
3) Turn knob
b
left or right to increase or decrease the HOUR value. .Press knob
b
again
to set.
4) Turn knob
b
left or right to increase or decrease the MINUTE value. Press knob
b
again to set. The time is set and the display shows the previous mode.
C
Audio Settings
The tone and individual speaker levels may be adjusted.
1) Press knob
C
; the display shows Bass and the current level setting.
2) Turn knob
C
to adjust the level.
3) To advance to the next setting, press knob
C
.
4) The sequence of audio settings that may be adjusted using the above process is shown
below:
BASS → MIDDLE → TREBLE → BAL L=R → FADER F=R → BEEP 2ND → LOUD ON
Note: When an EQ is activate, BASS, MIDDLE, TREBLE and LOUD are not displayed.
Note: Some vehicles do not have rear speakers installed. In this case, no sound will be
heard if the FADER setting is set to the rear. Always return the FADER setting to the
FADER F+R in this case.
C
Beep Setting
The beep setting controls when the warning beep sound will be heard:
BEEP ON – Beep sound whenever any function button is pressed or when Bluetooth device
connection is lost.
BEEP 2ND – Beep sound whenever any tuner preset is stored or music track cue or review
buttons are pressed.
18