manualshive.com logo in svg

Hyundai Accent 2013, Owner'S Manual

The Hyundai Accent 2013 Owner's Manual is a comprehensive guidebook that provides detailed instructions and information about your vehicle. This invaluable manual is available for free download from our website, ensuring easy access to all the essential knowledge you need to maintain, operate, and enjoy your Hyundai Accent to the fullest.

Share
Download
background image

What to do in an emergency

10

6

6. Loosen the wheel lug nuts coun-

terclockwise one turn each, but do
not remove any nut until the tire
has been raised off the ground.

7. Place the jack at the front or rear

jacking position closest to the tire
you are changing. Place the jack
at the designated locations under
the frame. The jacking positions
are plates welded to the frame
with two tabs and a raised dot to
index with the jack.

WARNING

- Changing a tire

• To prevent vehicle movement

while changing a tire, always
set the parking brake fully,
and always block the wheel
diagonally opposite the wheel
being changed.

• We recommend that the

wheels of the vehicle be
blocked, and that no person
remain in the vehicle that is
being jacked.

ORBC060003

1JB6025

Summary of Contents for Accent 2013



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Accent 2013

Federal Signal Corporation CommCenter D1 Series Installation And Service Instructions Manual preview
CommCenter D1 Series
Brand: Federal Signal Corporation Pages: 16
Ford 2008 Mustang Quick Reference Manual preview
2008 Mustang
Brand: Ford Pages: 2
FVC Sprinter Bed System Adventure Wagon Kit Installation Manual preview
Sprinter Bed System Adventure Wagon Kit
Brand: FVC Pages: 8
DEFA WarmUp 411702 Fitting Instructions Manual preview
WarmUp 411702
Brand: DEFA Pages: 9
rough country Slim Line LED Light Grille Kit Manual preview
Slim Line LED Light Grille Kit
Brand: rough country Pages: 8
AA Products SR-A260 Instruction Manual preview
SR-A260
Brand: AA Products Pages: 4
Hyundai Santa Fe 2006 Owner'S Manual preview
Santa Fe 2006
Brand: Hyundai Pages: 280
Big Mikes Performance Parts STO N SHO SNS 144 Installation Procedures Manual preview
STO N SHO SNS 144
Brand: Big Mikes Performance Parts Pages: 7
Lincoln MKZ 2018 Quick Reference Manual preview
MKZ 2018
Brand: Lincoln Pages: 10
Nav TV Ford 4” UNI-CAM Manual preview
Ford 4” UNI-CAM
Brand: Nav TV Pages: 6
Saab 2007 9-3 Remote Starter Owner'S Manual preview
2007 9-3 Remote Starter
Brand: Saab Pages: 304
E&G Classics 1409-0102-10 Installation Instructions preview
1409-0102-10
Brand: E&G Classics Pages: 3
Skoda KAROQ 2017 Owner'S Manual preview
KAROQ 2017
Brand: Skoda Pages: 324
Ford Mustang 2007 Supplement Manual preview
Mustang 2007
Brand: Ford Pages: 40
FALCON RIDGE CF-UFORCE-DRW01 Instructions For Installation And Care preview
CF-UFORCE-DRW01
Brand: FALCON RIDGE Pages: 6
Renault CAPTUR 2019 Vehicle Instruction Card preview
CAPTUR 2019
Brand: Renault Pages: 11
APS iBoard IB-R159 Manual preview
iBoard IB-R159
Brand: APS Pages: 4
BMW 325i 1991 Electrical Troubleshooting Manual preview
325i 1991
Brand: BMW Pages: 64

Brands by name

Popular brands

Load more brands