manualshive.com logo in svg

Hyundai Accent 2013, Owner'S Manual

The Hyundai Accent 2013 Owner's Manual is a comprehensive guidebook that provides detailed instructions and information about your vehicle. This invaluable manual is available for free download from our website, ensuring easy access to all the essential knowledge you need to maintain, operate, and enjoy your Hyundai Accent to the fullest.

Share
Download
background image

Driving your vehicle

32

5

Good braking practices

• After parking the vehicle, check to be

sure the parking brake is not engaged
and that the parking brake indicator
light is out before driving away.

• Driving through water may get the

brakes wet. They can also get wet
when the car is washed. Wet brakes
can be dangerous! Your car will not
stop as quickly if the brakes are wet.
Wet brakes may cause the car to pull
to one side.
To dry the brakes, apply the brakes
lightly until the braking action returns to
normal, taking care to keep the car
under control at all times. If the braking
action does not return to normal, stop
as soon as it is safe to do so and call
an authorized HYUNDAI dealer for
assistance.

• Don't coast down hills with the car out

of gear. This is extremely hazardous.
Keep the car in gear at all times, use
the brakes to slow down, then shift to a
lower gear so that engine braking will
help you maintain a safe speed.

• Don't "ride" the brake pedal. Resting

your foot on the brake pedal while driv-
ing can be dangerous because it can
result in the brakes overheating and
losing their effectiveness. It also
increases the wear of the brake com-
ponents.

WARNING

• Whenever leaving vehicle or

parking, always set the parking
brake as far as possible and fully
engage the vehicle's transaxle
into the park position. Vehicles
not fully engaged in park with the
parking brake set are at risk for
moving inadvertently and injur-
ing yourself or others.

• All vehicles should always have

the parking brake fully engaged
when parking to avoid inadver-
tent movement of the car which
can injure occupants or pedestri-
ans.

WARNING

• The Vehicle Stability Management

system is not a substitute for
safe driving practices but a sup-
plementary function only. It is the
responsibility of the driver to
always check the speed and the
distance to the vehicle ahead.
Always hold the steering wheel
firmly while driving.

• Your vehicle is designed to acti-

vate according to the driver’s
intention, even with installed
VSM. Always follow all the normal
precautions for driving at safe
speeds for the conditions –
including driving inclement
weather and on a slippery road.

• Driving with varying tire or wheel

sizes may cause the VSM system
to malfunction. When replacing
tires, make sure they are the
same size as your original tires.

Summary of Contents for Accent 2013



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Accent 2013

GOgroove SMARTmini AUX Operating Manual preview
SMARTmini AUX
Brand: GOgroove Pages: 9
DEFA WarmUp 411702 Fitting Instructions Manual preview
WarmUp 411702
Brand: DEFA Pages: 9
rough country Slim Line LED Light Grille Kit Manual preview
Slim Line LED Light Grille Kit
Brand: rough country Pages: 8
Mercedes-Benz GUARD S 500 Supplement To Operators Manual preview
GUARD S 500
Brand: Mercedes-Benz Pages: 30
Axxess AXGMLN-08 Installation Instructions Manual preview
AXGMLN-08
Brand: Axxess Pages: 8
Wagan Road Ready Seat Protector User Manual preview
Road Ready Seat Protector
Brand: Wagan Pages: 12
Chevrolet 2016 Suburban Owner'S Manual preview
2016 Suburban
Brand: Chevrolet Pages: 50
Volvo S90 2018 Quick Manual preview
S90 2018
Brand: Volvo Pages: 42
Columbia THERAPEDIC 2000 Instructions For Use Manual preview
THERAPEDIC 2000
Brand: Columbia Pages: 14
Brodit ProClip 833995 Manual preview
ProClip 833995
Brand: Brodit Pages: 2
Yenkee YAC 450 User Manual preview
YAC 450
Brand: Yenkee Pages: 22
Whelen Engineering Company 12H4S140 Installation Manual preview
12H4S140
Brand: Whelen Engineering Company Pages: 4
ROLEC WallPod Series Installation Instructions preview
WallPod Series
Brand: ROLEC Pages: 2
Quadratec QuadraTop Adventure Top S Manual preview
QuadraTop Adventure Top S
Brand: Quadratec Pages: 13
Ranger design C24-DL Installation Manual preview
C24-DL
Brand: Ranger design Pages: 14
Chevrolet El Camino 1983 Owner'S Manual preview
El Camino 1983
Brand: Chevrolet Pages: 103
Peak PKC0BJ Owner'S Manual preview
PKC0BJ
Brand: Peak Pages: 8
Renault Kangoo Manual preview
Kangoo
Brand: Renault Pages: 239

Brands by name

Popular brands

Load more brands