Hyundai Accent 2013 Owner'S Manual Download Page 204

Page: 204 / 402

Features of your vehicle

134

✽

NOTICE FOR USING THE
iPod

DEVICE

• Some iPod

models might not support

the communication protocol and the

files will not be played.

Supported iPod

models:

- iPod

Mini

- iPod

4th (Photo) ~ 6th (Classic) gen-

eration

- iPod

Nano 1st~4th generation

- iPod

Touch 1st~2nd generation

• The order of search or playback of

songs in the iPod

can be different

from the order searched in the audio

system.

• If the iPod

disabled due to its own

malfunction, reset the iPod

. (Reset:

Refer to iPod

manual)

• An iPod

may not operate normally

on low battery.

• Some iPod

devices, such as the

iPhone, can be connected through the

Bluetooth

Wireless Technology inter-

face. The device must have audio

Bluetooth

Wireless Technology capa-

bility (such as for stereo headphone

Bluetooth

Wireless Technology). The

device can play, but it will not be con-

trolled by the audio system.

(Continued)
• Deactivate (turn off) the equalizer

function of an iPod

when adjust-

ing the audio system’s volume,
and turn off the equalizer of the
audio system when using the
equalizer of an iPod

• When the iPod

cable is connect-

ed, the system can be switched to
AUX mode even without iPod

device and may cause noise.
Disconnect the iPod

cable when

you are not using the iPod

device.

• When not using iPod

with car

audio, detach the iPod

cable

from iPod

. Otherwise, iPod

may

remain in accessory mode, and
may not work properly.

CAUTION IN USING THE
iPod

DEVICE

• The HYUNDAI iPod

Power Cable

is needed in order to operate
iPod

with the audio buttons on

the audio system. The USB cable
provided by Apple may cause
malfunction and should not be
used for HYUNDAI vehicles.

❋

The HYUNDAI iPod

Power

Cable may be purchased
through your HYUNDAI
Dealership.

• When connecting iPod

with the

iPod

Power Cable, insert the con-

nector to the multimedia socket
completely. If not inserted com-
pletely, communications between
iPod

and audio may be interrupt-

ed.

• When adjusting the sound effects

of the iPod

and the audio sys-

tem, the sound effects of both
devices will overlap and might
reduce or distort the quality of the
sound.

(Continued)

Summary of Contents for Accent 2013



















































































































































































































































































































































































































Search results

Summary of Contents for Accent 2013

Reviews:

Related manuals for Accent 2013

Brands by name

Popular brands

Hyundai Accent 2013, Owner'S Manual

Search results

Summary of Contents for Accent 2013

Reviews:

Related manuals for Accent 2013

Brands by name

Popular brands