manualshive.com logo in svg

Hyundai Accent 2013, Owner'S Manual

The Hyundai Accent 2013 Owner's Manual is a comprehensive guidebook that provides detailed instructions and information about your vehicle. This invaluable manual is available for free download from our website, ensuring easy access to all the essential knowledge you need to maintain, operate, and enjoy your Hyundai Accent to the fullest.

Share
Download
background image

5 25

Driving your vehicle

Releasing the parking brake

To release the parking brake, first apply
the foot brake and pull up the parking
brake lever slightly. Secondly depress the
release button (1) and lower the parking
brake lever (2) while holding the button.

If the parking brake does not release or
does not release all the way, have the
system checked by an authorized
HYUNDAI dealer.

Check the brake warning light by turning
the ignition switch ON (do not start the
engine). This light will be illuminated
when the parking brake is applied with
the ignition switch in the START or ON
position.
Before driving, be sure the parking brake
is fully released and the brake warning
light is off.
If the brake warning light remains on
after the parking brake is released while
engine is running, there may be a mal-
function in the brake system. Immediate
attention is necessary.
If at all possible, cease driving the vehi-
cle immediately. If that is not possible,
use extreme caution while operating the
vehicle and only continue to drive the
vehicle until you can reach a safe loca-
tion or repair shop.

ORB050002

WARNING

• To prevent unintentional move-

ment when stopped and leaving
the vehicle, do not use the
gearshift lever in place of the
parking brake. Set the parking
brake AND make sure the
gearshift lever is securely posi-
tioned in 1st (First) gear or R
(Reverse) for manual transaxle
equipped vehicles and in P (Park)
for automatic transaxle equipped
vehicles.

• Never allow anyone who is unfa-

miliar with the vehicle to touch
the parking brake. If the parking
brake is released unintentionally,
serious injury may occur.

• All vehicles should always have

the parking brake fully engaged
when parking to avoid inadver-
tent movement of the vehicle
which can injure occupants or
pedestrians.

WK-23

Summary of Contents for Accent 2013



















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Accent 2013

IAG IAG-ENG-5003BK Instructions preview
IAG-ENG-5003BK
Brand: IAG Pages: 3
Metra Electronics 70-5511 Installation Instructions preview
70-5511
Brand: Metra Electronics Pages: 2
Metra Electronics 99-3103 Installation Instructions preview
99-3103
Brand: Metra Electronics Pages: 2
BrandMotion FLTW-7690 Installation Instructions preview
FLTW-7690
Brand: BrandMotion Pages: 2
UAZ UAZ-374195 Operating Manual preview
UAZ-374195
Brand: UAZ Pages: 90
Voxoa MCU-20A(P40) User Manual preview
MCU-20A(P40)
Brand: Voxoa Pages: 48
GMC TopKick 2007 Owner'S Manual preview
TopKick 2007
Brand: GMC Pages: 430
Vangear Woody-Pod Instruction Manual preview
Woody-Pod
Brand: Vangear Pages: 5
Safe Fleet FRC SafeTrack Hardware Installation Manual preview
FRC SafeTrack
Brand: Safe Fleet Pages: 20
Kleinn RS-GM6 Installation Manual preview
RS-GM6
Brand: Kleinn Pages: 8
RAWLINK 36772 Instruction Manual preview
36772
Brand: RAWLINK Pages: 25
Toyota 1991 CAMRY Body Section Repair Manual preview
1991 CAMRY Body Section
Brand: Toyota Pages: 111
Buick 2001 Century Owner'S Manual preview
2001 Century
Brand: Buick Pages: 351
Honda 2014 Civic Hybrid Technology Reference Manual preview
2014 Civic Hybrid
Brand: Honda Pages: 23
Porsche Turbo 2007 Driver Manual preview
Turbo 2007
Brand: Porsche Pages: 347
SSANGYONG ACTYON Owner'S Manual preview
ACTYON
Brand: SSANGYONG Pages: 321
Outback RCPR96 Installation Manual preview
RCPR96
Brand: Outback Pages: 3
Reese 30054 Instruction Manual preview
30054
Brand: Reese Pages: 11

Brands by name

Popular brands

Load more brands