Safety features of your vehicle
8
3
Adjusting the height up and down
(if equipped)
To raise the headrest, pull it up to the
desired position (1). To lower the head-
rest, push and hold the release button (2)
on the headrest support and lower the
headrest to the desired position (3).
Removal (if equipped)
To remove the headrest, raise it as far as
it can go then press the release button
(1) while pulling upward (2).
To reinstall the headrest, put the head-
rest poles (3) into the holes while press-
ing the release button (1). Then adjust it
to the appropriate height.
Folding the rear seat (if equipped)
The rear seatbacks may be folded to
facilitate carrying long items or to
increase the luggage capacity of the
vehicle.
ORB030007
WARNING
Make sure the headrest locks in
position after adjusting it to proper-
ly protect the occupants.
ORB030008
WARNING
The purpose of the fold-down rear
seatbacks is to allow you to carry
longer objects than could not oth-
erwise be accommodated.
Never allow passengers to sit on
top of the folded down seatback
while the car is moving as this is
not a proper seating position and
no seat belts are available for use.
This could result in serious injury
or death in case of an accident or
sudden stop. Objects carried on the
folded down seatback should not
extend higher than the top of the
front seats. This could allow cargo
to slide forward and cause injury or
damage during sudden stops.
Summary of Contents for Accent 2013
Page 6: ...1 How to use this manual 1 2 Fuel requirements 1 2 Vehicle break in process 1 6 Introduction ...
Page 211: ...4 141 Features of your vehicle RB_H800RBG_AUDIO USB AUDIO H800RBG H800RBGL H800RBGE ...
Page 362: ...7 71 Maintenance ORB073075L ORB070024 Engine compartment ...
Page 363: ...Maintenance 72 7 ORB073076 ORB070061 Diesel only ...