3 27
Safety features of your vehicle
Installing a child restraint system
with a lap belt (on the center rear
seat) (if equipped)
To install a child restraint system on the
center rear seats, do the following:
1. Place the child restraint system on the
center rear seat.
2. Extend the latch plate tongue of the
lap belt.
3. Route the lap belt through the restraint
according to the seat manufacturer’s
instructions.
4. Buckle the seat belt and adjust the lap
belt for a snug hold on the child
restraint by pulling on the loose end of
the belt. After installation of the child
restraint system, try to move it in all
directions to be sure the child restraint
system is securely installed.
Installing a child restraint system by
lap/shoulder belt
To install a child restraint system on the
outboard or center rear seats, do the fol-
lowing:
1. Place the child restraint system in the
seat and route the lap/shoulder belt
around or through the restraint, follow-
ing the restraint manufacturer’s
instructions. Be sure the seat belt web-
bing is not twisted.
2. Fasten the lap/shoulder belt latch into
the buckle. Listen for the distinct “click”
sound.
Position the release button so that it is
easy to access in case of an emergency.
E2BLD347
E2MS103005
OEN036101
Summary of Contents for Accent 2013
Page 6: ...1 How to use this manual 1 2 Fuel requirements 1 2 Vehicle break in process 1 6 Introduction ...
Page 211: ...4 141 Features of your vehicle RB_H800RBG_AUDIO USB AUDIO H800RBG H800RBGL H800RBGE ...
Page 362: ...7 71 Maintenance ORB073075L ORB070024 Engine compartment ...
Page 363: ...Maintenance 72 7 ORB073076 ORB070061 Diesel only ...