background image

1

FEATURES OF YOUR HYUNDAI

57

!

WARNING:

o Before installing child restraints , al-

ways refer to the "Child Restraint
System" section to ensure correct
installation and occupant protection
is maximized.

o Make sure that the occupant does not

have any body parts (head, arms &
legs) protruding outside the restrain-
ing system. If an inflating airbag was
to strike an infant child on the head, it
may cause serious injury.

o Ensure the opening for the Curtain

Airbag System remains unobstructed
at all times, so that the airbags can
inflate properly if needed.

Important Safety Notes for Curtain
Airbag Systems

Following is a number of safety points
concerning this system which should al-
ways be observed to ensure risk of injury
is reduced in an accident.

!

!

WARNING:

o The built in coat hooks should only be

used for light weight clothing. Ensure
that clothing pockets are free of any
heavy or sharp objects. When using
coat hooks, do not hang clothes on
coat hangers.

o The space between the occupant and

the curtain airbag must never be oc-
cupied by children, passengers or
pets. Occupants should never lean
out or have any parts of their body
protruding from the window while the
engine is running.

o Do not move the sun visor out to cover

the side window if there is an item
attached to it such as garage door
remote control, pens, compact disc
pocket, air fresheners or the like.
These objects may cause injury if the
Curtain Airbag is deployed.

o Where sun blinds are fitted to the rear

doors, these must not obstruct or
impair the airbag in any way.

o Do not install any accessories or

children’s toys in the Curtain Airbag
deployment zones, as this may im-
pair the operation of the system or
throw parts of them into the vehicle
cabin causing injury to occupants if
the system is deployed.

o To maintain the integrity of the Cur-

tain Airbag system, any work, removal
or installation of the airbag and asso-
ciated components (such as roof lin-
ing and side trims) should always be
performed by an authorized Hyundai
dealer.

WARNING:

Summary of Contents for 2010 Azera















































































































































































































































































































































Reviews: