manualshive.com logo in svg

Hyundai 2010 Azera, Owner'S Manual

Share
Download
Hyundai 2010 Azera Owner'S Manual Download Page 224

2

DRIVING YOUR HYUNDAI

21

C190E02JM

Gross Axle Weight

Gross Vehicle

Weight

2. The total gross vehicle weight with

trailer must not exceed the Gross
Vehicle Weight Rating (GVWR) shown
on the vehicle identification plate (see
page 8-2). The total gross vehicle
weight is the combined weight of the
vehicle, driver, all passengers and
their luggage, cargo, hitch, trailer
tongue load and other optional equip-
ment.

NOTE:

1. Never load the trailer with more weight

in the back than in the front. About
60% of the trailer load should be in the
front half on the trailer and the remain-
ing 40% in the rear.

C190D01S-AAT

Safety Chains

Should the hitch connection between your
car and the trailer or vehicle you are towing
fail, the trailer or vehicle could wander
dangerously across other lanes of traffic
and ultimately leave the roadway. To elimi-
nate this potentially dangerous situation,
safety chains, attached between your car
and the trailer or towed vehicle, are re-
quired in most states.

C190E01TG-AAT

Trailer Weight Limit

Tongue Load

Total Trailer Weight

o Keep the tongue load 10% of the total

trailer load.

o Tongue load

o Tongue loads can be increased or de-

creased by re-distributing the load in
the trailer.
This can be verified by checking the
total weight of the loaded trailer and
then checking the load on the tongue.

C190E01JM

x 100 = 10% (MAX)

Total trailer weight

Summary of Contents for 2010 Azera















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands