manualshive.com logo in svg

Hyundai 2010 Azera, Owner'S Manual

Share
Download
Hyundai 2010 Azera Owner'S Manual Download Page 45

1

FEATURES OF YOUR HYUNDAI

32

3. After confirming that (a) and (b) are

latched, pull the seat belt out of the
retractor and insert the metal tab (c) into
the buckle (d).

B220A02TG

B200A02NF-AAT

SEAT BELTS - Rear Seat Center  3-
Point System With Combination
Locking Retractor (If Installed)

1. Pull the seat belt out of the rear seat

package tray.

2. Before fastening the rear seat center

belt, confirm the metal tab (a) and buckle
(b) are latched together.

B220A01TG

The seat belt is released by pressing the
release button in the locking buckle. When
it is released, the belt should automatically
draw back into the retractor.
If this does not happen, check the belt to be
sure it is not twisted, then try again.

B210A01A-AAT

To Release the Seat Belt

B210A01NF

Summary of Contents for 2010 Azera















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands