manualshive.com logo in svg

Hyundai 2010 Azera, Owner'S Manual

Share
Download
Hyundai 2010 Azera Owner'S Manual Download Page 197

1

FEATURES OF YOUR HYUNDAI

184

o When the formatted byte/sector set-

ting of External USB devices is not
either 512BYTE or 2048BYTE, then
the device will not be recognized.

o Only the USB device formatted to FAT

12/16/32.

o USB device without USB IF authenti-

cation may not be recognizable.

o Make sure the USB connection termi-

nal does not come in contact with
human body or any object.

o If you repeat mounting or dismount-

ing USB device in a short period of
time, it may break the device.

o You might hear strange noise when

mounting or dismounting a USB de-
vice.

o If you dismount the external USB de-

vice during playback in USB mode,
the external USB device can be dam-
aged or malfunction. Therefore, mount
the external USB device when the
engine is turned off or in another
mode.

o Depending on the type and capacity

of the external USB device or the type
of the files stored in the device, there
is a difference in the time taken for
recognition of the device, but this is
not a trouble and you only have to wait.

o Do not use the USB device for other

purposes than playing music files.

o Use of USB accessories such as the

recharger or heater using USB I/F
may lower the performance or cause
trouble.

o If you use devices such as the USB

hub you purchased separately, the
vehicle’s audio system may not rec-
ognize the USB device. Connect the
USB device directly to the multimedia
terminal of the vehicle.

Summary of Contents for 2010 Azera















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands