manualshive.com logo in svg

Hyundai 2010 Azera, Owner'S Manual

Share
Download
Hyundai 2010 Azera Owner'S Manual Download Page 249

3

18

WHAT TO DO IN AN EMERGENCY

IF YOU LOSE YOUR KEYS

D120A02A-AAT

Information about the key of immobilizer
system can be found on page 1-3.

!

CAUTION:

If the car is being towed with all four
wheels on the ground, it can be towed
only from the front. Be sure that the
transaxle is in neutral. Do not tow at
speeds greater than 30 mph (50 km/h)
and for more than 15 miles (25 km). Be
sure the steering is unlocked by placing
the key in the "ACC" position. A driver
must be in the towed vehicle to operate
the steering and brakes.

Do not attempt to tow your vehicle in this
manner on any unpaved surface. This
could result in serious damage to your car.
Nor should towing be attempted if the
wheels, drive train, axles, steering or
brakes are damaged. Before towing, be
sure the transaxle is in neutral and the key
is in "ACC" (with the engine off) or in the
"ON" position (with the engine running).  A
driver must be in the towed car to steer it
and operate the brakes.

NOTE:

Before towing, check the level of the
automatic transaxle fluid. If it is below
the "HOT" range on the dipstick, add
fluid. If you cannot add fluid, a towing
dolly must be used.

Summary of Contents for 2010 Azera















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands